• Enter Bios and change boot device to CDROM
• Place Imaging Bootable CD into Drive
• At the LILO prompt type “manual”
• When prompted for configuration etc. skip by pressing enter until you reach the BASH# prompt
• Remove the Bootable CD and replace with the CD with the appropriate image
• At the BASH# type “cdrom.s” this will mount the CDROM
• At the prompt type “hdparm -d1 /dev/hda” this will enable DMA support on the hard disk and

speed up the imaging process.

• At the prompt type "img restorel /mnt/cdrom/<Image Name>"
• The image will now download from the CD (this will take about 45mins)
• When the imaging process finishes remove the CD and type “reboot”
• Windows will now go through the mini setup process

when the client screen appears login as local administrator (tick workstation only box)

• Install the wireless card by using the setup utility provided on the CD (Cisco)